Industrial Sectional door; Designed for factory, warehouse and car park entrances.  The sectional door also requires materials and tools. It is used at entry and exit points.

Steel polyurethane filled sandwich Our sectional doors produced from panels provide the highest level of security and energy saving. Sectional doors, which can also be manufactured using transparent plexiglass, are preferred in showrooms and service entrances thanks to the transparency they provide.

To open by sliding towards the ceiling. It enables more efficient use of usage areas in spaces and allows the door opening to be used more clearly.

Sectional door operates by sliding within the side rails by making optimal use of the space between the ceiling height and the top level of the door. The door can be mounted in different ways according to the distance of this gap. (can be applied with standard, low, high and guillotine bearing options.)

Industrial Sectional Door Detail

The motor systems of sectional doors can be controlled with the help of a key control unit as well as with a remote control.

Vehicleç Sectional doors, which play an active role in traffic and pedestrian traffic, can be applied with standard buttons, chain manual pull type or remote control.

Sectional industrial door systems operate with a direct shaft clutch motor system from the side or with a hoist chain system that works in the same way.

It is an ideal system with motorized or manual use for all industrial structures such as factories and warehouses.

Sectional The doors have a security system against spring breaks and rope throws.

There are special details on the panels and rails that prevent fingers from being pinched.

Industrial Sectional door systems, level-adjustable ramps and truck bed compactor With its loading bellows it ensures smooth and safe loading and unloading in businesses.< /p>

Sectional industrial door panels are pulled by wrapping steel ropes onto drums of varying types depending on the size and bearing type of the door. In case the ropes break or the springs break or are damaged in any way, the door will be prevented from falling thanks to the rope break safety system and the spring break safety security system.

Sectional Door Panel Detail

The 615 or 495 mm panels that make up the door are connected to each other with steel, aluminum or stainless steel hinges painted electrostatically in the panel color.

The panels, with a thickness of 42 mm and a thermal coefficient of 0.78 W/m2K, consist of two steel, aluminum or stainless steel plates, filled with polyurethane foam with a density of 40 kg/m3.< /p>

There is a strong layer inside the panel that increases wind resistance. There are steel plates. The wind resistance of our panels is 80 km/h.

Thanks to EPDM seals, high insulation is provided against rain and wind on the sides, bottom and top.

Sectional door panels with standard white color (inside-outside RAL 9002) can also be applied in different RAL colors to suit the building exterior.

 The sheet metal sheets on the front and back surfaces of the sectional industrial door panels are firmly joined to each other in four layers. Double-walled acrylic glass windows can be opened in any desired row in the door panels for illumination purposes.

Sectional Door Service Door

Sectional door In doors with large widths, a section of the door is used to regulate pedestrian traffic. It can be divided by fixed panels. A personnel access door can be placed inside these fixed panels. In cases where the width is not large, the personnel passage door can be opened on the movable panels of the door. In this alternative, industrial door and personnel door open and close as a whole. Service door< /strong> When it is open, the motor will never be activated and prevents your door from getting stuck.

Sectional Door Features

• Rope breakage safety system
• The spring set consists of double springs
• Spring buffers
• 2” galvanized steel rail set
• Aluminum top sealing profile
• Aluminum lower support profile
• EPDM bottom sealing gasket
• EPDM top sealing gasket
• Hollow shaft with keyway
• Solid shaft with keyway
• 65 mm omega wind support sheet is used for doors wider than 6000 mm
• Door Handle
• Rear connection C profile
• Bottom seal
• Side sealing gasket
• After 5500 mm, double side hinges and long wheels are used

Sectional Door Advantages

• Installation Easy,
• Thermal and Sound Insulation is high,
• Works noise-free ç
• A little power. It opens and closes by pressing
• Opening the door does not cause any loss of space 
• Provides working opportunities in accordance with the structure of the building ,
• The clear opening of the door is fully utilized,
• Parts and parts are easily changed,
• The working environment is illuminated by opening the window systems 
• Personnel entrance and exit is provided by attaching a service door to the panel door.